@leocavalcante/pi-tmux0.1.7

pi-tmux

A Pi extension that names your tmux window from the current task and active conversation history. It also marks windows and tmux sessions when Pi is waiting for input.

A prompt about fixing authentication tests might produce fix auth tests. Follow-ups such as continue or yes, do it use recent dialogue to keep the task recognizable. Resuming a Pi session restores a task title without a new prompt. Naming runs in the background and does not delay Pi's answer.

Contents

• Installation
  • Naming model
  • Retry a title
  • Pin a manual title
  • Mark a waiting title as read
  • Inspect title status
  • Synchronize without AI
  • Quit and close the pane
• Behavior
  • Shared panes and cleanup
• Privacy and security
• Development
• Publishing
• License

State	Window name	tmux session name
Pi is working alone in its window	fix auth tests	Existing name
Pi has settled and is waiting for input	* fix auth tests	* plus the existing name
Pi quits, another Pi remains in the window	Current task title, marked if a remaining pane is waiting	Existing name, still prefixed if another Pi pane is waiting
Last Pi in a window quits normally	zsh by default; configurable	Existing name, still prefixed if a Pi pane in another window is waiting

Generated and pinned task titles are lowercase and limited to 24 ASCII characters, including the waiting prefix. tmux session names keep their original text and length. The waiting marker means at least one Pi pane has stopped running, not that the task succeeded. A window stays marked while any Pi pane in that window waits. A session stays marked while any Pi pane across its windows waits. Reloading clears the pane's waiting marker but preserves its task title, so immediately after /reload the title is unmarked until a later Pi event updates it.

Installation

Run interactive Pi inside tmux, with tmux available on PATH and TMUX_PANE set by tmux. Linux CI exercises tmux 3.4 and a pinned tmux 3.7c build; macOS CI uses the runner's installed version. These are tested versions, not a stated minimum-version requirement. Tested with Pi 1.5.0; CI also checks the minimum supported Pi 1.1.0 peer version. The package declares Node.js 22.19 or newer; the Pi extension API peer range is ^1.1.0. Pi supplies the runtime dependencies, with no build step.

The npm package is available:

pi install npm:@leocavalcante/pi-tmux

To install the current GitHub source instead:

pi install git:github.com/leocavalcante/pi-tmux

Run /reload in Pi after installation. If you previously used the local tmux-title extension, remove that copy before loading this package to avoid running two naming requests for each prompt.

To update a GitHub installation:

pi update git:github.com/leocavalcante/pi-tmux

After installing from npm, use pi update npm:@leocavalcante/pi-tmux instead.

Run /reload in each running Pi instance afterward so busy panes register window ownership. Waiting panes from older runtimes are still recognized from their waiting flags.

Naming model

The default naming model is openai-codex/gpt-6-luna, using your existing Pi credentials. Authenticate with /login and make sure that model is available. This does not change the model used for your main conversation.

Set PI_TMUX_MODEL before starting Pi to use another registered model:

PI_TMUX_MODEL=anthropic/claude-sonnet-4-5 pi

Use provider/model as listed by Pi. The setting is trimmed at the edges and may contain at most 256 ASCII characters afterward. Provider IDs may contain visible punctuation other than /; model IDs may contain additional slashes. Whitespace and control characters inside either ID are rejected. The first slash separates provider from model, so openrouter/vendor/model uses openrouter as the provider and vendor/model as the model. An unset or blank setting uses the default; off (case-insensitive) disables naming. The extension reads this setting when it loads. Changes to a parent shell's exports require restarting Pi; /reload rereads Pi's own process environment. An invalid setting disables naming and warns without falling back to another provider. A missing model or missing credentials also does not trigger fallback.

The last Pi pane normally resets its window to zsh when it quits. Set PI_TMUX_IDLE_TITLE before starting Pi to choose another idle title; the value uses the same lowercase ASCII cleanup and 24-character limit as generated names. Empty or non-alphanumeric values, values longer than 64 Ki UTF-16 code units, and values matching the limited sensitive-output checks fall back to zsh; these checks are best-effort, not comprehensive redaction. The value applies only on a future graceful quit when this is the last Pi pane in its window; it does not rename an open window. /reload rereads the setting from Pi's process environment.

For waiting markers without any naming requests or dialogue collection:

PI_TMUX_MODEL=off pi

Status-only mode still formats waiting window names. The last Pi in a window resets its name to the configured idle title on graceful quit. You can set a manual title without enabling AI naming.

Retry a title

Run /tmux-title inside interactive Pi in tmux to refresh from the active session context. It retries even when the context matches a failed request, cancels any outstanding naming request, and preserves the current waiting status. The bare command returns without waiting for the model. An empty session makes no request. AI naming must be enabled, with no manual pin active.

Type /tmux-title to see argument suggestions in Pi's editor. Completion filters read, status, sync, set <name>, and auto as you type. Choosing set inserts set so you can enter the name, not a literal <name> placeholder. Completion does not read dialogue or task names, make AI or tmux requests, or replace text after set . Arguments longer than 128 Ki UTF-16 code units are rejected with a generic warning; autocomplete returns no suggestions for prefixes over the same limit. Rejected input is not echoed.

Pin a manual title

/tmux-title set fix auth tests
/tmux-title auto

set <name> pins a title for this Pi pane and cancels outstanding AI naming. New input, settlement, and compaction keep the pinned text while waiting markers still update. The extension does not collect naming context or make naming requests while the pin is active. Manual titles use the same lowercase, ASCII, and length rules as generated titles, and work with PI_TMUX_MODEL=off. Inputs longer than 64 Ki UTF-16 code units are rejected before screening to bound work. Empty names and names containing no letters or numbers are rejected. Values matching the limited sensitive-output checks are also rejected before cleanup, so obvious credentials or personal data are not pinned. This is not comprehensive redaction. If a tmux update fails, the pin stays active but the command warns instead of confirming success. Repeat set <name> or use sync to retry.

auto releases the pin and requests a title from the active context. It respects PI_TMUX_MODEL=off and does not clear the current waiting marker. The manual title stays until a new name succeeds. Pins are in-memory, not saved to Pi history. Session replacement, tree navigation, reload, and quit release them. A bare /tmux-title leaves an active pin alone.

Mark a waiting title as read

Run /tmux-title read to clear this Pi pane's waiting marker without closing Pi or requesting a new title. The window loses * when no other Pi pane in it is waiting; the session loses * when no Pi pane in any window is waiting.

Inspect title status

Run /tmux-title status for a read-only snapshot of the title mode, naming configuration, pending naming work, the last rejected-title category, and local waiting state. It shows pane, window, and session IDs, their waiting flags, and queued former-location repairs.

Status makes no AI requests, collects no dialogue, and never writes titles or flags to tmux. It omits names, model-setting values, model output, and provider errors; rejection details are limited to a fixed category and a manual-title hint. Sensitive-looking model output is reported only by that fixed category. AI naming: configured means the setting is valid, not that the model or its credentials are available. Status checks the tmux server identity in its snapshot. If it detects a restart, it fails closed locally, cancelling naming and discarding state tied to the old server; restart Pi to reconnect safely because the inherited pane ID may have been reused. Until then, /tmux-title, /tmux-title auto, /tmux-title read, /tmux-title sync, and /tmux-title set <name> warn that Pi must restart. Snapshot values may change while Pi is working; run the command again for a fresh reading.

Synchronize without AI

Run /tmux-title sync to reapply this pane's task title and waiting/ownership flags, and retry former-location repairs. Use it after moving a pane or when tmux has recovered from a failed update. It works with AI naming off, missing credentials, or an invalid naming setting.

Sync collects no dialogue and does not access models or credentials. It keeps the title mode, local waiting state, and pending naming request unchanged. A completed, current naming result can be applied; a pending result can still update the title later. Like other title updates, sync can replace a peer's task title in a shared window. Without a task title, an unmarked custom name stays intact.

Success messages only confirm current, successful updates. Failed updates warn; superseded, disposed, or continuously moving updates do not announce success. If some former-location repairs remain queued, sync reports that separately. Repeat the command to retry them.

Quit and close the pane

Run /quit-pane inside interactive Pi in tmux to exit Pi cleanly and close the pane Pi is running in. The pane closes after Pi has completed its shutdown. If tmux is unavailable or Pi is not running interactively inside tmux, the command warns and leaves Pi running.

Behavior

• With AI naming enabled and no manual pin, each non-empty interactive prompt requests a title using recent dialogue from the active session branch plus the new prompt.
• Startup, resume, fork, reload, and tree navigation request a title from the active session context. Compaction refreshes it from the compacted context.
• Final settlement refreshes the title when the assistant's text adds context. Identical bounded context does not start another request.
• An empty Pi session makes no naming request and preserves an unmarked custom window name. Lifecycle waiting markers, quit cleanup that retains a live peer's title, and former-window repairs preserve long custom text without applying task-title casing or length rules.
• Context comes from Pi's active session projection. Abandoned branches, compacted originals, and text removed by Pi context edits are not used. To bound work in tool-heavy sessions, history selection inspects at most the latest 4,096 projected messages; the current prompt and compaction summary are handled separately. Per-message text extraction inspects at most 128 content blocks and scans no more than 1,000 leading whitespace code units.
• Titles are forced to lowercase and clipped at a word boundary when possible.
• If the provider supplies phase metadata, only final_answer blocks are considered. When metadata is present but no final block exists, output is rejected rather than falling back to the last text block; without phase metadata, the last text block is used. Responses with more than 128 content blocks are rejected; signatures over 4 Ki UTF-16 code units are treated as unrecognized metadata. If a provider ignores the requested 96-token cap and selected output exceeds 64 Ki UTF-16 code units, it gets one correction attempt and is not applied as-is. Other overlong, over-worded, or multiline first candidates also get one correction request. A still-overlong candidate is clipped at a word boundary only when it remains a 2–4-word title; multiline, over-worded, and otherwise unusable retry output is rejected.
• * marks a fully settled run, after tool work, retries, and queued continuations are finished. It does not mean the task succeeded.
• The 24-character limit includes the marker. Waiting titles reserve two characters for * , leaving up to 22 for the task name.
• New input, another run, session replacement, reload, and graceful shutdown clear that pane's waiting flag. Tree navigation refreshes the active branch's title while preserving the current waiting state. Window and session markers remain while another pane in their scope is waiting. Marker updates make no additional model calls and still work if the naming model is unavailable.
• The extension targets the window and session containing Pi's TMUX_PANE, even if you have switched focus elsewhere. Renames use the pane ID so a move after the title lookup does not rename its former window or session. After marker writes, the window title is read again so a move during that update does not copy the source title or incorrectly skip quit cleanup. Each write batch also checks the server PID from its lookup on the tmux server; a restart between lookup and write therefore cannot apply cached numeric IDs to a replacement server. If a later lookup detects a new server, this extension instance cancels naming and stops writing because TMUX_PANE may now refer to an unrelated pane that reused the old ID.
• Window markers aggregate waiting Pi panes in that window. Session markers aggregate waiting Pi panes across all windows. A busy or exiting pane cannot clear another pane's marker. Window renames choose the prefix and its length budget on the tmux server, even if another pane changed status after lookup. Session names are not summarized, lowercased, or clipped. A literal leading * is preserved, with the waiting marker added separately. Control characters, backslashes, and other characters that tmux escapes in a formatted name may not round-trip through rename commands; the exact escaping can vary between tmux versions. If a custom session name's formatted value contains unsafe escapes, its session marker is skipped; an unsafe formatted window name skips its waiting marker when no task title is available. Names are preserved, pane flags and any safe marker still update, and a generic warning is shown. For names that can be safely renamed, the extension keeps each session's unmarked name in the namespaced @pi-tmux-session-base-name tmux session option so it can distinguish a literal prefix from its marker across status updates. Window names use the same stored-base approach to distinguish a literal prefix when waiting state or a leading * makes the marker ambiguous, using the namespaced @pi-tmux-window-base-name option. On first seeing an existing session or window with no stored base, the extension preserves its displayed name; an old waiting marker left by an earlier version may therefore appear twice on a later waiting update rather than risking loss of a literal prefix. The server skips a window rename when its displayed name is already correct, so startup preserves automatic-rename.
• Changed naming context cancels the previous request, including when a refresh finds no remaining naming text after context edits. It also discards queued title updates from superseded requests at tmux command boundaries. Later status updates keep the previously applied title rather than reusing a discarded model result. Session changes, tree navigation, reload, and shutdown cancel outstanding work too.
• Naming requests use SSE, with retries and cache retention disabled. Reasoning-capable models use minimal reasoning because some workspaces reject disabled reasoning. Non-reasoning models receive no reasoning override. Requests have a 15-second timeout and a 96-token output cap. The extension stops waiting at the deadline even if a provider ignores cancellation. It clears its pending state, timer, and abort listener, and ignores late results or failures. A provider that ignores aborts may still keep its underlying request alive. Cancellation from new input or lifecycle changes releases the extension's timer and listener without waiting for it.
• Print, JSON, and RPC modes do not update tmux names or markers. Extension-injected input does not directly request a title; later refreshes can include resulting dialogue.
• Naming failures keep the existing task name; waiting status can still update. Shape-only rejections (multiple lines, title length, or word count) are quiet and appear only as a fixed category in /tmux-title status. Other failures can show at most one automatic warning per extension load. Identical context is not retried automatically after a failed naming request. /tmux-title allows another warning if the explicit retry fails.

Shared panes and cleanup

Multiple interactive Pi panes in one tmux window share its task title. The most recent task-title update wins, including manual pins. Waiting-marker updates alone preserve the current shared title instead of replaying a stale per-pane title; a new AI result, manual pin, or explicit /tmux-title sync can replace it. Quitting one Pi keeps the current shared task title while another Pi remains in that window, whether it is busy or waiting. Cleanup chooses ownership and reads the latest shared title on the tmux server, protecting peers that start or rename after lookup. A peer in a different window does not prevent idle-title cleanup. The waiting marker aggregates all Pi panes in its window independently of which pane last named it. A waiting pane in a different window marks the session but not this window.

Renaming turns off tmux's automatic process-based naming for that window. The last Pi to quit gracefully resets the name to the configured idle title (zsh by default), regardless of your actual shell, and does not re-enable automatic naming. /reload and Pi session replacement keep ownership registered, clear that pane's waiting status, then refresh the task name from the active history. The existing task name stays until a naming request succeeds.

A forced kill cannot run cleanup and may leave task names, waiting flags, or ownership flags behind. If Pi has stopped but its pane remains, run these commands from the shell in that pane to clear only its stale flags before relying on another Pi's next status update:

tmux set-option -p -t "$TMUX_PANE" @pi-tmux-active 0
tmux set-option -p -t "$TMUX_PANE" @pi-tmux-waiting 0

Pane moves do not trigger an immediate update. The moved Pi's next status update also refreshes its most recently observed former window and session markers. /tmux-title sync performs this update on demand without an AI request. Repair uses each window's latest task text and respects other panes' waiting flags. Unmarked custom window names and their automatic-rename setting stay unchanged. Vanished targets are ignored; transient failures are retried on later status updates. Tracking is in memory, limited to eight former windows and eight sessions. If the pane keeps moving during repair, each update makes at most four passes; remaining repairs wait for a later update. No tmux hooks are installed.

Closing a pane without a graceful Pi shutdown cannot run repair. A Pi remaining in the former location must refresh it. To restore automatic process-based names for a window, run this from a shell in one of its panes:

tmux set-window-option -t "$TMUX_PANE" automatic-rename on

Privacy and security

With AI naming enabled, a naming request can send up to 6,000 UTF-16 code units of task context to the configured model. These limits count UTF-16 code units, so a supplementary Unicode character counts as two; truncation keeps such characters intact:

• Up to 2,000 UTF-16 code units from your new prompt. Oversized prompts retain both ends around [... middle of prompt omitted ...]; shorter prompts are included in full.
• Up to eight recent user, assistant, or branch-summary text entries, each capped at 1,000 UTF-16 code units. Older entries are omitted to fit the total cap.
• The latest active compaction summary, capped at 1,000 UTF-16 code units.

Images, thinking blocks, tool calls, tool results, shell output, system prompts, and custom extension messages are excluded. Summaries and ordinary dialogue can still mention details from tool output. Before model lookup or provider transport, the bounded context is checked locally with limited patterns for recognizable credentials. These include selected provider-specific formats (for example GitHub, GitLab, Docker Hub, PyPI, Browserbase, Firecrawl, LangSmith, Jina AI, Tavily, and Tailscale tokens, Stripe webhook signing secrets, Slack API tokens, Discord and Slack webhook URLs, Microsoft Teams webhook URLs, Azure DevOps PATs, Google OAuth/API keys, and other service tokens), npm .npmrc _auth username/password pairs, Docker config auth values encoding username/password pairs, and legacy Base64 _password values, CloudFront signed-cookie signatures, Akamai EdgeAuth tokens, and credential-bearing URLs, including CloudFront signed URLs, AWS S3 Signature V2, AWS Signature V4, Google Cloud Storage V2/V4, Google Cloud CDN signed URLs, OpenStack Swift temporary URLs, Baidu BOS signed authorization URLs, Tencent COS SHA-1 query-signed URLs, Alibaba Cloud OSS V1/V4 signed URLs, Cloudinary signed delivery URLs, Imgix Secure URL signatures, ImageKit Secure URL signatures, NGINX expiring Secure Link query signatures, Box shared-link URLs, Filemail /d/ transfer IDs, GoFile /d/ shared-link IDs, Wormhole end-to-end share keys in URL fragments, Discord server invite URLs, Zoom meeting passcodes and Webex meeting passwords embedded in recognized join URLs, legacy OneDrive redirect/embed auth keys, 1drv.ms short-link IDs and s! share keys, Microsoft Graph encoded sharing URLs, legacy Dropbox file/folder share IDs and current file/folder rlkey values, Google Drive/Docs shared-link resource keys in URLs, API responses and headers, Google Photos shared-album short links, Apple iCloud Shared Album and Photo links on legacy and current routes, MEGA file and folder share-link keys, Oracle Object Storage pre-authenticated request URLs, Proton Drive generated share-link passwords, pCloud public-link codes, WeTransfer short-link codes, SwissTransfer /d/ and /dl/ share-link UUIDs, Bearer, Token, and ApiKey authorization values, Negotiate/NTLM/Kerberos authentication tokens and challenges, legacy HTTP Signature proofs, RFC 9421 HTTP Message Signature proofs, Digest Authorization response hashes, and Authentication-Info rspauth hashes, selected session-cookie IDs in Set-Cookie headers, Base64 Basic authorization values, and long values assigned to common credential labels, including explicit session and cookie assignments. For supported credential labels, YAML block scalars with tags or anchors are also checked, as are shorter non-placeholder password/passphrase assignments and recognizable PEM, OpenSSH, PGP, SSH2, and PuTTY private-key file markers. The context scanner also checks recognizable ASCII and internationalized email addresses, explicitly labeled U.S. SSN-shaped values, explicitly labeled ITINs in recognized IRS number ranges, and explicitly labeled EINs in the conventional 2-7 digit format, calendar-valid numeric dates following explicit date-of-birth labels, and UK National Insurance numbers. Explicitly labeled NHS numbers with 10 digits and a valid Modulus 11 check digit are also screened using the algorithm specified in the NHS Data Dictionary. Explicitly labeled Brazilian CPF values with valid check digits, explicitly labeled Canadian SIN values with valid Luhn check digits, and explicitly labeled Aadhaar numbers with 12 digits, a leading digit from 2–9, and valid Verhoeff check digits. Explicitly labeled Chinese/PRC national-ID and resident-identity-card values, including common Simplified Chinese labels such as 居民身份证号码 and 公民身份号码, are checked only in the 18-character form with an accepted regional prefix, a calendar-valid birth date, and the standard weighted check character; generic ID labels remain unmatched. Explicitly labeled Japanese My Number and Japan individual-number values, including labels such as 個人番号 and マイナンバー, are checked when 12 decimal digits (optionally separated by spaces or hyphens) pass the weighted MOD 11 check; generic number/ID labels remain unmatched. The exact rule is published in the J-LIS check-digit rule (Japanese PDF). Explicitly labeled Swedish personal identity and coordination numbers, including personnummer and samordningsnummer, are checked in the 10- or 12-digit form with a calendar-valid birth date and Luhn control digit, consistent with Skatteverket's Modulus 10 method, which uses alternating weights 1 and 2; the coordination-number date offset and standard hyphen/plus separators are supported. Generic ID labels remain unmatched. French social security/NIR values with a 13-character identifier (including Corsican 2A/2B department codes) and a matching 2-digit control key are checked only with explicit French-specific labels; generic ID and NIR labels remain unmatched (official overview; INSEE format and check-key specification). Spanish DNI and NIE numbers with a valid modulo-23 control letter are checked only with Spain-specific or unambiguous Spanish-language labels; generic DNI, NIE, and NIF labels remain unmatched. See the Ministry of the Interior control-digit guide for the modulo-23 remainder rule and NIE-prefix conversion. Explicitly labeled Indian PAN values with the conventional 10-character letter/digit layout and a recognized fourth-character category are checked too. Explicitly labeled Australian TFNs matching the local weighted Modulus 11 checksum pattern, along with Medicare-card numbers with valid check digits, are screened too. This local TFN check is best-effort screening and does not confirm ATO issuance. The ATO says software developers may request its TFN validation algorithm (ATO guidance). Explicitly labeled New Zealand IRD numbers in the current issued range (up to 200,000,000) with valid mod-11 checksums are checked too; see Inland Revenue's 2026 increase to the validation ceiling. Explicitly labeled IBANs with supported country lengths and valid MOD 97 checksums are checked too. Explicitly labeled U.S. ABA routing numbers with accepted routing-symbol prefixes and valid weighted checksums are checked too. Because bank-account formats vary, only explicitly labeled bank-account-like values with 6–17 decimal digits are screened; spaces or hyphens may separate the digits. Because passport formats vary, only explicitly labeled passport-like values with 6–12 ASCII alphanumeric characters and at least one digit are checked. Explicit driver-license/licence, driving-licence, driver-ID, and DL-number fields with 6–20 ASCII alphanumeric characters, at least one digit, and optional hyphen grouping are screened; other labels remain unmatched. Explicitly labeled card verification codes (CVV/CVC and card-specific verification/security-code labels) with 3–4 decimal digits are also screened; generic security-code labels are not. Explicitly labeled PINs and personal identification numbers with 4–8 decimal digits are screened too. Explicitly labeled OTP/TOTP, MFA/2FA, one-time password/passcode, and authenticator-code fields with 4–8 decimal digits are screened; generic verification-code labels are not. Explicit backup/recovery code/key fields with 6–32 ASCII alphanumeric characters, at least one digit, and optional hyphen grouping are screened; generic code/key labels are not. Phone numbers and Luhn-valid, explicitly labeled payment-card-shaped values are checked too, including values written with Unicode decimal digits. If detected, the request is skipped and the current title is kept; warnings do not include matching text, and blocked context is not kept in the extension's deduplication cache. This is a limited, best-effort check, not comprehensive secret redaction, so credentials that do not match can still be sent. Provider billing, subscription limits, and data handling apply to naming requests that proceed. A run can request a title on input and again at settlement when its context changes; an invalid length or word-count result can trigger one short correction request. Each /tmux-title retry also makes a request when naming context is available. PI_TMUX_MODEL=off or an active manual pin prevents these naming requests. Manual title commands do not send the title or dialogue to a model.

The model is instructed not to include secrets or personal information in titles. Before applying a response, the extension checks raw and compatibility-normalized output against the same limited set of selected provider-specific credential formats and private-key file markers, credential-bearing URLs, authorization values, and labeled credential patterns. It also checks recognizable ASCII and internationalized email addresses, explicitly labeled U.S. SSN-shaped values, explicitly labeled ITINs in recognized IRS number ranges, and explicitly labeled EINs in the conventional 2-7 digit format, calendar-valid numeric dates following explicit date-of-birth labels, and UK National Insurance numbers. Explicitly labeled NHS numbers with 10 digits and a valid Modulus 11 check digit are also screened using the algorithm specified in the NHS Data Dictionary. Explicitly labeled Brazilian CPF values with valid check digits, explicitly labeled Canadian SIN values with valid Luhn check digits, and explicitly labeled Aadhaar numbers with 12 digits, a leading digit from 2–9, and valid Verhoeff check digits. Explicitly labeled Chinese/PRC national-ID and resident-identity-card values, including common Simplified Chinese labels such as 居民身份证号码 and 公民身份号码, are checked only in the 18-character form with an accepted regional prefix, a calendar-valid birth date, and the standard weighted check character; generic ID labels remain unmatched. Explicitly labeled Japanese My Number and Japan individual-number values, including labels such as 個人番号 and マイナンバー, are checked when 12 decimal digits (optionally separated by spaces or hyphens) pass the weighted MOD 11 check; generic number/ID labels remain unmatched. The exact rule is published in the J-LIS check-digit rule (Japanese PDF). Explicitly labeled Swedish personal identity and coordination numbers, including personnummer and samordningsnummer, are checked in the 10- or 12-digit form with a calendar-valid birth date and Luhn control digit, consistent with Skatteverket's Modulus 10 method, which uses alternating weights 1 and 2; the coordination-number date offset and standard hyphen/plus separators are supported. Generic ID labels remain unmatched. French social security/NIR values with a 13-character identifier (including Corsican 2A/2B department codes) and a matching 2-digit control key are checked only with explicit French-specific labels; generic ID and NIR labels remain unmatched (official overview; INSEE format and check-key specification). Spanish DNI and NIE numbers with a valid modulo-23 control letter are checked only with Spain-specific or unambiguous Spanish-language labels; generic DNI, NIE, and NIF labels remain unmatched. See the Ministry of the Interior control-digit guide for the modulo-23 remainder rule and NIE-prefix conversion. Explicitly labeled Indian PAN values with the conventional 10-character letter/digit layout and a recognized fourth-character category are checked too. Explicitly labeled Australian TFNs matching the local weighted Modulus 11 checksum pattern, along with Medicare-card numbers with valid check digits, are screened too. This local TFN check is best-effort screening and does not confirm ATO issuance. The ATO says software developers may request its TFN validation algorithm (ATO guidance). Explicitly labeled New Zealand IRD numbers in the current issued range (up to 200,000,000) with valid mod-11 checksums are checked too; see Inland Revenue's 2026 increase to the validation ceiling. Explicitly labeled IBANs with supported country lengths and valid MOD 97 checksums are checked too. Explicitly labeled U.S. ABA routing numbers with accepted routing-symbol prefixes and valid weighted checksums are checked too. Because bank-account formats vary, only explicitly labeled bank-account-like values with 6–17 decimal digits are screened; spaces or hyphens may separate the digits. Because passport formats vary, only explicitly labeled passport-like values with 6–12 ASCII alphanumeric characters and at least one digit are checked. Explicit driver-license/licence, driving-licence, driver-ID, and DL-number fields with 6–20 ASCII alphanumeric characters, at least one digit, and optional hyphen grouping are screened; other labels remain unmatched. Explicitly labeled card verification codes (CVV/CVC and card-specific verification/security-code labels) with 3–4 decimal digits are also screened; generic security-code labels are not. Explicitly labeled PINs and personal identification numbers with 4–8 decimal digits are screened too. Explicitly labeled OTP/TOTP, MFA/2FA, one-time password/passcode, and authenticator-code fields with 4–8 decimal digits are screened; generic verification-code labels are not. Explicit backup/recovery code/key fields with 6–32 ASCII alphanumeric characters, at least one digit, and optional hyphen grouping are screened; generic code/key labels are not. Phone numbers and Luhn-valid, explicitly labeled payment-card-shaped values are checked too, including values written with Unicode decimal digits. Supported YAML block-scalar forms with tags or anchors, plus shorter non-placeholder password/passphrase assignments, are checked too. A view with whitespace, control, and format characters removed catches some obfuscated values. Rejected responses are not included in warnings. These limited checks are defense in depth, not comprehensive secret or personal-information redaction. Do not put secrets into prompts. Window names are visible in your tmux status bar and may be retained by tmux session-persistence plugins.

This extension does not write prompts, responses, or credentials to files, and it does not print provider error payloads. Authentication is resolved by Pi. tmux runs with argument arrays, not interpolated shell commands. Generated and pinned titles are sanitized before insertion into fixed tmux formats. Existing shared titles come from format variables after command parsing. Marker repair uses if-shell -F to evaluate a format without invoking a shell. Title text cannot inject shell commands, tmux options, or additional format expressions.

Like other Pi extensions, it runs with the same OS permissions as Pi. This repository contains source and synthetic tests only.

Development

See CONTRIBUTING.md for development setup, checks, tests, and guidance before contributing.

Publishing

GitHub Actions tests pushes to main and pull requests. Publishing a stable GitHub release tagged v<package.json version>, such as v0.1.1, runs the same test matrix before publishing @leocavalcante/pi-tmux to npm with provenance. Prereleases are not published, and npm versions cannot be overwritten.

The publishing workflow uses npm Trusted Publishing with GitHub OIDC. It does not use an npm token or an Actions publishing secret.

npm requires the package to exist before configuring a trusted publisher. Bootstrap version 0.1.0 was published manually once, without provenance. Do not repeat this bootstrap publish; the commands below are retained as historical setup reference. The original manual publish bypassed the workflow's main-branch check. Verify the checkout and version before logging in, then use interactive npm login and 2FA without creating a CI token:

git fetch origin
test "$(git branch --show-current)" = "main"
test -z "$(git status --porcelain)"
test "$(git rev-parse HEAD)" = "$(git rev-parse origin/main)"
test "$(npm pkg get version)" = '"0.1.0"'
npm login
npm ci --ignore-scripts
npm audit --audit-level=high
npm run check
npm test
npm publish --access public --provenance=false --ignore-scripts

The initial local publish has no provenance. Configure the package's trusted publisher on npm using GitHub owner leocavalcante, repository pi-tmux, and workflow filename publish.yml. Leave the environment name blank and allow npm publish. The workflow must already exist on GitHub.

After configuring trust, select "Require two-factor authentication and disallow tokens" in npm's publishing access settings. Before each stable release, bump package.json and package-lock.json to a new, unpublished version, then publish a matching GitHub release tag. Do not run the workflow for the previously published bootstrap version. Later releases publish through OIDC with provenance. See npm's trusted publishing guide and the package-existence prerequisite.

License

MIT.