@huseynsnmz/pi-modes0.3.0

pi-modes

Switch Pi between permission modes with Shift+Tab.

Mode	What the agent can do	Who approves
normal	Anything your permission rules allow	You
auto	Anything your permission rules allow	Your permission judge first, then you if it defers
plan	Read and research, then submit a plan. No edits	You, for any non-read-only command
read-only	Read and research only	Nobody. Everything else is blocked
yolo	Anything your deny rules don't block, or anything at all if you turn them off	Nobody. It doesn't ask

Shift+Tab cycles normal → auto → plan → read-only → normal. The footer shows the current mode. yolo is off this cycle: you start it with /mode yolo.

The mode is saved per session and survives --continue, except yolo, which resumes as normal. A new session always starts in normal, and nothing in a project can change that.

Quick start

Requires Pi 1.5 or newer.

1. Install it:

   pi install npm:@huseynsnmz/pi-modes@0.4.0
   

2. Move it above @gotgenes/pi-permission-system, because pi install adds packages last. Otherwise, in plan and read-only you may be asked to approve an action that is then blocked anyway. It stays blocked either way, and the extension warns you at startup. Skip this step if you don't use that package.

   f=~/.pi/agent/settings.json
   jq '.packages |= (map(select(tostring | contains("pi-modes"))) + map(select(tostring | contains("pi-modes") | not)))' "$f" > "$f.tmp" && mv "$f.tmp" "$f"
   

3. If you use pi-permission-system, allow plans so you aren't asked twice:

   f=~/.pi/agent/extensions/pi-permission-system/config.json
   jq '.permission.submit_plan = "allow"' "$f" > "$f.tmp" && mv "$f.tmp" "$f"
   

4. Restart Pi. The footer shows mode: normal, and Shift+Tab changes the mode.

To install from git instead, use pi install git:github.com/huseynsnmz/pi-modes@v0.4.0.

Commands

Input	What it does
Shift+Tab	Next mode
/mode	Pick a mode from a list
/mode plan	Switch directly to a mode
/mode yolo	Start yolo, after a warning
/mode default	Pick the mode new sessions start in
/mode default plan	Set it directly

The default is saved as defaultMode in ~/.pi/agent/extensions/pi-modes/config.json. A resumed session keeps the mode it was in. yolo can't be the default, because it has to be asked for each time.

Shift+Tab normally cycles the thinking level, and this extension takes it over. To keep that action on another key, add this to ~/.pi/agent/keybindings.json:

{ "app.thinking.cycle": "alt+t" }

Yolo

For when you've decided not to be asked. /mode yolo shows a red warning, and only Enter starts it. Shift+Tab goes back to normal.

With pi-permission-system, add the link to its config once, then restart Pi. The link does nothing outside yolo:

f=~/.pi/agent/extensions/pi-permission-system/config.json
jq '.authorizerChain = ((.authorizerChain // []) + ["pi-modes"] | unique)' "$f" > "$f.tmp" && mv "$f.tmp" "$f"

What it does and doesn't cover:

• deny rules still block, unless you choose otherwise. A link only answers questions the rules left open. In the warning, d turns them off for this run. The agent then gets separate tools (yolo_bash, yolo_read, yolo_write, yolo_edit) that your rules don't name, and the footer says deny rules off. Other tools, like MCP, stay under the rules, and so do subagents. A top-level "*": "deny" still blocks these tools. Leaving yolo puts everything back.
• With pi-sandbox, yolo stays inside the sandbox. Deny rules can't be turned off, because the tools that ignore them would run outside it. Yolo won't start with the sandbox off, and if you turn the sandbox off during yolo, the next tool call is blocked and you're back in normal. Load pi-modes first in packages, or yolo is refused. pi-sandbox's own prompts still appear in yolo, and Enter on one picks "Allow for this session".
• Subagents are covered. Their prompts come to your session, and yolo answers them.
• Access outside the project can still ask. The permission system doesn't let any link approve its external_directory and path surfaces. To stop those prompts too, set those rules to allow yourself. That applies in every mode.
• The review log says who approved. Approvals are recorded under the link name pi-modes.

The permission system's own yoloMode setting is different: it applies to every open Pi session and stays on until you turn it off.

Review what you keep approving

The package includes a skill that turns repeated approvals into allowlist rules. Run it now and then:

/skill:review-permissions

It reads the permission system's review log and your past chats, and groups what you approved and what ran. The agent rates each group and shows you the list, and only the rules you pick are added. You approve the exact list in a dialog, which the agent can't answer for you. It refuses rules that are too broad, such as git *, or that cover git push, rm, curl or an interpreter like python. They back up the config first and place new rules so that your deny rules still win. What ran in yolo is ignored, and so are commands that look like they hold a secret.

With pi-sandbox, it also lists the paths and domains the sandbox blocked. What you pick goes in ~/.pi/agent/sandbox.json. It refuses credential folders, whole home folders, and places where a written file runs later, such as shell profiles and git hooks.

How plan mode ends

In plan mode the agent calls the submit_plan tool. You then choose one of:

• Approve, normal: switches to normal and the agent starts implementing.
• Approve, auto: switches to auto and the agent starts implementing.
• Keep planning: stays in plan and sends your feedback to the agent.

Using it with other extensions

@gotgenes/pi-permission-system: still runs in every mode. This extension only adds restrictions, so a deny rule always wins.

pi-permission-classifier: runs only in auto. In every other mode it defers, and the request goes to your normal prompt. Set it up as its README describes, with permission-judge in authorizerChain. Its perm-judge: footer entry stays visible in all modes, so go by the mode: entry. If the classifier is listed after pi-permission-system, it only registers during your first prompt, and auto starts working from then on.

Without a classifier, auto behaves like normal, and the extension warns you when you switch to it.

pi-subagents: blocked in plan and read-only, because a child agent could write files. In normal and auto it is unchanged.

pi-frame: the editor frame follows the mode, and turns red in yolo.

pi-look and pi-claude-code-ui: no conflicts are expected, as neither uses Shift+Tab. The mode appears through Pi's standard status API.

What plan and read-only allow

• Allowed tools: read, grep, find, ls, read-only bash, and submit_plan in plan mode.
• Blocked tools: write, edit, subagents, MCP tools and every other tool, including ones added later.
• Read-only bash: a fixed list of commands, such as ls, cat, rg and git status. A command is refused if it uses $, backticks, redirects, subshells, background jobs, unquoted globs, control characters or a path to a binary. Options that write or run code are refused too, including bundled and abbreviated forms such as sort -uo and sort --outp. Quote a glob you mean literally, as in find . -name '*.ts'.

Any other command asks you in plan and is blocked in read-only.

Security limits

These modes keep an honest agent on track. They are not a sandbox.

• Reads are not restricted by this extension. A read-only command can still read secrets, so keep deny rules for them in your permission system.
• A repo can already be malicious. Git can run code from a repository's config and hooks, even for git status, and a plain clone can bring them. In plan and read-only, git commands stop counting as read-only where a repository sets anything unusual or has a hook that reading can fire, which covers what's known today. Other tools can have their own ways in, so use a container for repos you don't trust.
• Child agents started earlier keep running. Switching mode doesn't stop a subagent that is already running.
• The classifier hook relies on an internal detail. There is no public way to switch a registered judge on and off, so this extension wraps it when it registers. It uses the global key that pi-permission-system documents for its service map. If that breaks, you get a warning on your first prompt that the judge may auto-approve outside auto.

Development

npm install --ignore-scripts
npm run check
npm test

The end-to-end test drives real Pi in a real terminal against a fake model, using a throwaway home directory:

npm run e2e:solo   # only this extension
npm run e2e        # with the five packages it was built for, in three load orders

npm run e2e installs those packages from npm with scripts disabled, then starts them.

Contributing

Issues are welcome, and pull requests are turned off. See CONTRIBUTING.md and SECURITY.md.

License

MIT